Password change tool updating modem georgina dating in the dark
Some have separate screens where you define a service.A service is a port number assigned to a name, like Camera2 and port 10002, then in the other screen, you select Camera 2 and specify the IP address, 192.168.1.100.In the DOS window, enter the command “ipconfig”, on a MAC enter the command “ifconfig”.You will see the IPv4 address, the subnet mask and the default gateway.
To avoid port conflicts, it’s better to use a number higher than 8000 but less than 60000.
Use this subnet mask (typically 255.255.255.0) and default gateway (the IP address of the router).
For an IP address, use the first 3 sets of numbers and chose a higher number up to 253 for the last, for example, if it’s 192.168.1.12, you can use an IP address like 192.168.1.100.
For example, if you have 3 cameras, you can use 10001, 1003.
From that point on, since port 80 is the default, you must specify the port number after the IP address separated by a colon when accessing the camera, for example if you used 10002, you will use to view the camera from your browser at home.